Motion Pro Rear Wheel Alignment Tool for HD
- For use on Softail, Sportster®, and Dyna®
- Designed to help set rear wheel alignment
- Fast, accurate and easy to use
- Eliminates the need to use a tape measure
- Proper wheel alignment extends chain/sprocket and belt life
MOTION PRO Rear Wheel Alignment Tool for H-D® P/N 08-0368
For Dyna® and Sportster® Models Place end of tool “A” into small hole in swingarm located approximately 6” in front of rearaxle. Place thumb screw pointer “B” in center of rear axle. Do this on both sides of the bike, and with the rear axle loosened, use the rear axle adjusters until “A” and “B” are the same distance apart on both sides. When finished, re-tighten the rear axle, and check belt tension using Motion Pro Part # 08-0350.
For Softail® Models Place end of tool “C” into center of swing armpivot shaft bolt. Place thumb screw pointer “B” in center of rear axle. Do this on both sides of the bike and with the rear axle loosened, use the rear axle adjusters until “C” and “B” are the same distance apart on both sides. When finished, re- tighten the rear axle, and check belt tension using Motion Pro part # 08-0350.
Note: Some exhaust systems may cause clearance issues when using this tool