MDR Sprocket Bolt Kit (6pc) M8 x 32mm
Free UK DeliveryON ORDERS OVER £50
Up to 60 Day ReturnsON ALL OUR PRODUCTS
ON ORDERS OVER £50
ON ALL OUR PRODUCTS
This Sprocket bolt kit includes sprocket bolts with factory style Fuji metal-locking nuts and washers. Each sprocket bolt has medium strength threadlock patches pre-applied, which liquifies and anaerobically seals when the bolt is tightened for a double lock.
The MDR Sprocket Bolts are the strongest, most complete sprocket fasteners available and have been developed and tested at the professional level in both motocross and off road applications.
Installation information:
Sprocket bolts are a critical fastener and must be installed properly to ensure your safety and to avoid damaging your machine. To insure long and reliable use of these quality fasteners..
Refer to your owner’s manual for the proper torque (typically 25 ft lbs), take the torque reading on the nut side. Never over-tighten sprocket bolts!
If your sprocket bolts become loose, they must be replaced! Sprocket bolts become loose only under extreme stress, an indication that either they were installed improperly or there is a problem with the drive line. Check the drive line for bent chain guides, bad wheel alignment, damaged mounting holes on the hub, etc. Properly tightened sprocket bolts on properly functioning drive lines will remain tight indefinitely.
