100% Forecast Film System (New Generation)
Free UK DeliveryON ORDERS OVER £50
Up to 60 Day ReturnsON ALL OUR PRODUCTS
ON ORDERS OVER £50
ON ALL OUR PRODUCTS
Keep an eye on the Forecast… it’s about to change. This revolutionary new generation film system offers the largest field of clear vision in motocross. The FORECAST is a complete system comprised of working parts that function seamlessly together resulting in the smoothest operating film system available today.
By re-designing a new system, we were able to engineer components that work together in unison to fight out the elements. Wider film, smoother pulls, and an advanced cleaning system contribute to achieving our goal of providing the maximum amount of vision in moto.
A complete system comprised of working parts that function seamlessly together resulting in the smoothest operating film system available today.
100% Forecast Film System features:
- Transparent canisters provide an easy view of remaining film and at 45mm’s wide it combined with a length of 24 feet per roll provides the maximum amount of vision in MX.
- Suitable for All Adult 100% Accuri & Strata goggles and simply replaces the original lens in your goggle.
- Prebuilt to tackle the muddiest conditions.
- Comes equipped with anti-fog, scratch resistant polycarbonate lens for unimpaired vision.
- 100% Forecast Film System (New Generation)
- Genuine OE parts
- Filter Category: 0.
- Light Transmission: 88%-92%
In the Box:
- 1 x Anti Fog Polycarbonate Clear Lens
- 2 x 45mm Roll-Off films.
- 1 x Lens Mud Flap.
- 1 x Viser
How to Load Forecast Film System:
- Set google on flat surface with Forecast canisters facing up.
- Open canister doors by presssing down on the latch while pushing up towards the center of the lens and releasing canister doors.
- Install a new roll of film in the supply side(left), positioning the slotted end of the film axle on the bootm of the axle housing.
- Carefully and partically remove film sticker and pull film across google lens to right canister. Do not discard sticker.
- Wrap film behind and around right side axle and secure with sticker edge.
- Reinstall canister doors to thier original postion, inserting the latches securely into the locked postion.
- Pull canister knob to advance the film and confirm smooth action.
- For complete installation, fit VISOR on the lens above film strip and between canisters.
